Redi-Stall Solid Surface Privacy Partitions

 

GENERAL DESCRIPTION 

Two series of Dupont Corian high performance privacy compartments

PREMIUM SERIES

• Concealed hardware- Reinforced solid surface components for durability 
• Optimizes use of solid surface surfaces throughout to leverage its benefits

STANDARD SERIES

• Some stainless steel hardware components exposed.
• Cost effective 

Toilet partitions can be supplied in 3 common styles

• Floor mounted- Overhead Braced- Entry level 
• Floor-to-ceiling mounted- Most stable
• Ceiling Hung – Less stable, more expensive system and installation

All styles feature wall-mounted urinal screens

Guaranteed field dimensions & digital pictures of rooms required for all installations

Tolerances may vary to +/- 1/8",  

Mounting hardware for any washroom accessories easily accommodated 

PRODUCT DESCRIPTION

All material is Dupont Corian homogeneous filled acrylic solid surface sheet

All material is 1/2" thick 

Certain components are reinforced and fabricated thicker for stability 

MOUNTING HARDWARE

All hardware is commercially available off the shelf to the end user. Most parts can ship same day. Manufacturer: Jacknob

STANDARD SERIES: All hardware is surface-mounted and visible where needed- Stainless steel type 304 

PREMIUM SERIES:Hardware surface-mounted inside, not visible at exterior

BOTH SERIES: Door Stop/Bumper: Shall be stainless steel type 304; with rubber bumpers to prevent damage to panel and pilaster; integrally mounted.

ACCESSORY PRODUCTS

 
Coat hooks, Door bumpers, Door pulls all stainless steel and are included.

Toilet paper holders and typical Division 10 accessories by others.

Sterling Surfaces can provide attachment hardware and installation of these as they apply to mounting on the Corian partitions if they are on site at installation.

Location of accessories to be noted on drawings.

FABRICATION

Corian Redi-Stalls components are fabricated to sizes and shapes indicated where possible. 

Architect or Owners representative MUST APPROVE shop drawings. 

Yield and shape is sometimes determined by the stock size of Dupont Corian 

Component edges shall have a smooth, uniform finish. 1/8” radius all edges 

Defective work shall be repaired or replaced- included at no charge in 3-year warranty.

Finish: “Sterling Surfaces Matte” 

INSTALLATION

If installation by others, after receipt of components, contractor or installer assumes responsibility for damage. It is their responsibility to install components plumb and level, in accordance with approved shop drawings and specific installation instructions.

CARE & MAINTENANCE

All Care & Maintenance instructions and Warranty information shall be provided by Sterling Surfaces. Project Manager/ General Contractor shall convey to owners or their representative this information upon completion of project. 

WARRANTY

Corian fabricated components warranted against fabrication defects for 3 years.

Options available for 5-year and 10-year extended coverage 

Warranty includes labor to remove or re-install replacements.

Corian material is warranted against material defect for 10 years

Hardware manufacturer guaranties product for 10 years